{"title":"Chevy SS Sedan 2014-2017 Wheels + Tire Upgrades","description":"\u003cp\u003eGive your Chevy SS Sedan 2014-2017 a wheel and tire combination that suits your driving priorities, from everyday comfort to a more performance-focused setup. Compare wheel dimensions, finishes, and tire options with your intended use in mind, rather than choosing on appearance alone.\u003c\/p\u003e\u003cp\u003eBefore ordering, verify bolt pattern, wheel width, offset, center bore, load rating, and brake-caliper clearance against the product’s application details. Check tire size, load and speed ratings, overall diameter, and clearance through steering and suspension travel, especially on lowered cars. For staggered setups, review front-to-rear sizing compatibility and rotation limitations. Confirm whether compatible lug hardware, hub-centric rings, or tire-pressure sensors are included or need to be purchased separately.\u003c\/p\u003e","products":[{"product_id":"vossen-hf-5-19x9-5-5x120-et40-deep-face-72-56-matte-gunmetal-wheel","title":"Vossen HF-5 19x9.5 \/ 5x120 \/ ET40 \/ Deep Face \/ 72.56 - Matte Gunmetal Wheel","description":"\u003cp\u003eVossen HF-5 19x9.5 \/ 5x120 \/ ET40 \/ Deep Face \/ 72.56 - Matte Gunmetal\u003c\/p\u003e\u003ch3\u003eVehicle Fitment Reference\u003c\/h3\u003e\u003cp\u003eSpecifications: 19 × 9.5 inches, 5 × 120 mm bolt pattern, +40 mm offset, 72.56 mm center bore, Deep Face, Matte Gunmetal. Part number: HF5-9B64.\u003c\/p\u003e\u003cp\u003eThe applications below are potential or conditional fitments, not guaranteed direct-fit applications. Confirm exact year, trim, axle placement, tire size, brake package and suspension clearance before ordering. Community experience with other wheels of the same dimensions does not establish this wheel's spoke-to-caliper clearance.\u003c\/p\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eVehicle group\u003c\/th\u003e\n\u003cth\u003eApplication years\u003c\/th\u003e\n\u003cth\u003eFitment notes\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eChevrolet Camaro\u003c\/td\u003e\n\u003ctd\u003e2010–2015\u003c\/td\u003e\n\u003ctd\u003eSS; ZL1 2012–2015; 1LE 2013–2015. Potential applications only; confirm exact trim, axle, tire size and brake\/suspension\/fender clearance when choosing tires.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eChevrolet Camaro\u003c\/td\u003e\n\u003ctd\u003e2016–2024\u003c\/td\u003e\n\u003ctd\u003eSS, ZL1 and 1LE applications require exact model-year and trim confirmation. Confirm axle, tire size and brake\/suspension\/fender clearance when choosing tires.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCadillac CTS-V\u003c\/td\u003e\n\u003ctd\u003e2009–2013\u003c\/td\u003e\n\u003ctd\u003ePotential application; confirm year, body style, axle and brake package.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCadillac CTS-V\u003c\/td\u003e\n\u003ctd\u003e2016–2019\u003c\/td\u003e\n\u003ctd\u003ePotential application; confirm year, axle and brake package.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eChevrolet Corvette C8\u003c\/td\u003e\n\u003ctd\u003e2020–2026\u003c\/td\u003e\n\u003ctd\u003ePotential application; confirm trim, axle, brake clearance and front\/rear tire pairing. Z06 and E-Ray compatibility is not established.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eChevrolet SS Sedan\u003c\/td\u003e\n\u003ctd\u003e2014–2017\u003c\/td\u003e\n\u003ctd\u003eConditional rear application based on owner installations of other 19×9.5 +40 wheels. A lowered setup with 275\/35R19 tires required rear-fender rolling after rubbing. Check alignment, loaded clearance, hub rings and this wheel's brake clearance. Front use is not established.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePontiac G8\u003c\/td\u003e\n\u003ctd\u003e2008–2009\u003c\/td\u003e\n\u003ctd\u003eConditional application based on comparable wheel-dimension reports. Rear rubbing has been reported with 285-width tires on 9.5-inch +40 wheels; fender rolling may be required. Front strut, tire and brake clearance must be measured. Confirm exact tire size, trim and axle before installation.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eChevrolet Caprice PPV\u003c\/td\u003e\n\u003ctd\u003e2011–2017\u003c\/td\u003e\n\u003ctd\u003ePotential custom-fit application based on Camaro\/G8 cross-fitment comparisons, not a documented installation of this exact wheel. Rear-fender interference under load or suspension compression is a concern; tire selection and fender work may be necessary. Test-fit both axles and confirm brake, suspension and hub compatibility before mounting tires.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003cp\u003eHave Vossen or a qualified wheel installer verify this exact part number and specification. Check wheel load rating, lug hardware and seat type, hub fit and any required hub-centric rings, spoke\/barrel clearance over brakes, and tire\/suspension\/fender clearance through full steering and suspension travel. Modification needs vary by vehicle, tire and ride height. Front-wheel use, a square setup and complete staggered-set compatibility are not confirmed.\u003c\/p\u003e","brand":"Vossen","offers":[{"title":"Default Title","offer_id":48683184881825,"sku":"VOSHF5-9B64","price":649.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0759\/9905\/1937\/files\/33e4765f623a936e8d60fdb86a018c3d_bd507bd1-5668-41ad-879f-8a810d7ceff7.jpg?v=1793722380"},{"product_id":"vossen-hf-7-20x10-5-5x120-et38-deep-face-72-56-gloss-black-wheel","title":"Vossen HF-7 20x10.5 \/ 5X120 \/ ET38 \/ Deep Face \/ 72.56 - Gloss Black Wheel","description":"\u003cp\u003eVossen HF-7 20x10.5 \/ 5X120 \/ ET38 \/ Deep Face \/ 72.56 - Gloss Black\u003c\/p\u003e\u003ch3\u003eVehicle Fitment Reference\u003c\/h3\u003e\u003cp\u003eSpecifications: 20 × 10.5 inches, 5 × 120 mm bolt pattern, +38 mm offset, 72.56 mm center bore, Deep Face, Gloss Black. Part number: HF7-0B11-38.\u003c\/p\u003e\u003cp\u003eApplications below are potential or conditional fitments, not guaranteed bolt-on applications. Confirm vehicle year, trim, axle and wheel\/brake compatibility before ordering. Community installations of other wheel designs do not establish this HF-7's spoke-to-caliper clearance.\u003c\/p\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eVehicle group\u003c\/th\u003e\n\u003cth\u003eApplication years\u003c\/th\u003e\n\u003cth\u003eFitment notes\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eChevrolet Camaro\u003c\/td\u003e\n\u003ctd\u003e2010–2015\u003c\/td\u003e\n\u003ctd\u003eSS; ZL1 2012–2015; 1LE 2013–2015. Potential applications only; confirm exact trim, axle, tire size and brake\/suspension\/fender clearance when choosing tires.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eChevrolet Camaro\u003c\/td\u003e\n\u003ctd\u003e2016–2024\u003c\/td\u003e\n\u003ctd\u003eSS, ZL1 and 1LE applications require exact model-year and trim confirmation. Confirm axle, tire size and brake\/suspension\/fender clearance when choosing tires.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCadillac CTS-V\u003c\/td\u003e\n\u003ctd\u003e2009–2013\u003c\/td\u003e\n\u003ctd\u003ePotential application; confirm body style, axle and brake package. Check tire and suspension\/fender clearance when choosing tires.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCadillac CTS-V\u003c\/td\u003e\n\u003ctd\u003e2016–2019\u003c\/td\u003e\n\u003ctd\u003ePotential application; confirm axle and brake package. Check tire and suspension\/fender clearance when choosing tires.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eChevrolet Corvette C8\u003c\/td\u003e\n\u003ctd\u003e2020–2026\u003c\/td\u003e\n\u003ctd\u003ePotential application; confirm trim, axle and wheel\/brake clearance. Verify front\/rear tire pairing when choosing tires. Z06 and E-Ray compatibility is not established.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eChevrolet SS Sedan\u003c\/td\u003e\n\u003ctd\u003e2014–2017\u003c\/td\u003e\n\u003ctd\u003ePotential custom rear application only. Community examples include 20×10 +38 and wider wheels with more positive offsets, not this exact 20×10.5 +38 HF-7. Fender protrusion and rubbing are concerns; bodywork or other setup changes may be necessary. Measure loaded suspension\/fender clearance when choosing tires. Front use is not established.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePontiac G8\u003c\/td\u003e\n\u003ctd\u003e2008–2009\u003c\/td\u003e\n\u003ctd\u003ePotential custom rear application. A reported 20×10.5 setup used +45 offset, rolled fenders and coilovers and still had mild rubbing. This +38 wheel sits 7 mm farther outward at the same width, so that installation does not establish clearance here. Additional clearance work may be needed; measure carefully when choosing tires. Front use is not established.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eChevrolet Caprice PPV\u003c\/td\u003e\n\u003ctd\u003e2011–2017\u003c\/td\u003e\n\u003ctd\u003ePotential custom rear application based on Camaro\/G8 comparisons, not an exact-wheel installation. Community recommendations favor more positive offsets even for 20×10 rears and mention fender rolling. This wider +38 setup requires individual measurement; substantial fender-clearance work may be needed. Check loaded clearance when choosing tires. Front use is not established.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003cp\u003eTest-fit before mounting tires. Verify wheel load rating, correct lug hardware and seat type, hub fit and any required hub-centric rings, brake spoke\/barrel clearance, and inner\/outer clearance through full steering and suspension travel. Tire selection cannot correct wheel-to-brake interference or guarantee fender clearance. Modification requirements vary by vehicle and ride height. A square setup or complete staggered set is not confirmed.\u003c\/p\u003e","brand":"Vossen","offers":[{"title":"Default Title","offer_id":48684166054049,"sku":"VOSHF7-0B11-38","price":799.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0759\/9905\/1937\/files\/3fe6859edbd53e13bb3d86911e8cf1efL_6100dae9-e658-43a4-b648-5bf349783fcf.jpg?v=1793722903"},{"product_id":"vossen-hf-7-20x9-5x120-et35-flat-face-72-56-gloss-black-wheel","title":"Vossen HF-7 20x9 \/ 5x120 \/ ET35 \/ Flat Face \/ 72.56 - Gloss Black Wheel","description":"\u003cp\u003eVossen HF-7 20x9 \/ 5x120 \/ ET35 \/ Flat Face \/ 72.56 - Gloss Black\u003c\/p\u003e\u003ch3\u003eVehicle Fitment Reference\u003c\/h3\u003e\u003cp\u003eSpecifications: 20 × 9 inches, 5 × 120 mm bolt pattern, +35 mm offset, 72.56 mm center bore, Flat Face, Gloss Black. Part number: HF7-0B02.\u003c\/p\u003e\u003cp\u003eApplications below include an exact-wheel retail application and conditional community-based cross-fitments. They are not guarantees for every trim, tire or suspension setup. Other wheel designs with matching dimensions do not establish this HF-7's spoke-to-caliper clearance.\u003c\/p\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eVehicle group\u003c\/th\u003e\n\u003cth\u003eApplication years\u003c\/th\u003e\n\u003cth\u003eFitment notes\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eChevrolet Camaro\u003c\/td\u003e\n\u003ctd\u003e2016–2024\u003c\/td\u003e\n\u003ctd\u003eThis exact wheel is listed for front or rear use. Confirm exact trim and brake package, including performance-brake options. Potential applications only; confirm exact trim, axle, tire size and brake\/suspension\/fender clearance when choosing tires. Complete staggered-set compatibility must be checked separately.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eChevrolet SS Sedan\u003c\/td\u003e\n\u003ctd\u003e2014–2017\u003c\/td\u003e\n\u003ctd\u003eConditional cross-fitment based on comparable Camaro-wheel and SS owner setups, not an exact HF7-0B02 installation. This +35 offset is more outward than factory SS wheels. Rear rubbing and fender rolling may be concerns depending on tire, load and ride height. Confirm axle, wheel\/brake fit and loaded suspension\/fender clearance when choosing tires.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePontiac G8\u003c\/td\u003e\n\u003ctd\u003e2008–2009\u003c\/td\u003e\n\u003ctd\u003eConditional application supported by owner reports for other 20×9 +35 wheels. One owner reported severe rear interference with 275\/35 tires but no interference with 255\/40 on their setup; these reports are not tire recommendations for every vehicle. Rear-fender rolling may be needed. Confirm axle, tire load rating, approved rim width, rolling diameter and loaded clearance when choosing tires; independently check HF-7 brake clearance.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eChevrolet Caprice PPV\u003c\/td\u003e\n\u003ctd\u003e2011–2017\u003c\/td\u003e\n\u003ctd\u003eConditional custom application based on Camaro\/G8 cross-fitment experience. Reports for 20×9 +40 Camaro wheels include tire-dependent rear rubbing; this +35 wheel sits 5 mm farther outward at the same width. Rear-fender rolling or other clearance work may be required. Confirm axle and brake\/hub compatibility, and check loaded suspension\/fender clearance when choosing tires.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003cp\u003eTest-fit before mounting tires. Verify wheel load rating, correct lug hardware and seat type, hub fit and any required hub-centric rings, spoke\/barrel clearance over brakes, and tire\/suspension\/fender clearance through full steering and suspension travel. Tire choice cannot resolve wheel-to-brake interference. Modification requirements depend on the vehicle, tire, alignment and ride height. A square setup is not established for the conditional applications.\u003c\/p\u003e","brand":"Vossen","offers":[{"title":"Default Title","offer_id":48684416303265,"sku":"VOSHF7-0B02","price":749.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0759\/9905\/1937\/files\/f5709f6dd0f75b6e1d6af2c5bfad7197.jpg?v=1793723033"},{"product_id":"vossen-hf-7-20x11-5x120-et40-deep-face-72-56-silver-polished-wheel","title":"Vossen HF-7 20x11 \/ 5x120 \/ ET40 \/ Deep Face \/ 72.56 - Silver Polished Wheel","description":"Vossen HF-7 20x11 \/ 5x120 \/ ET40 \/ Deep Face \/ 72.56 - Silver Polished\u003ch3\u003eVehicle Fitment Reference\u003c\/h3\u003e\u003cp\u003eSpecifications: 20 × 11 inches, 5 × 120 mm bolt pattern, +40 mm offset, 72.56 mm center bore, Deep Face, Silver Polished. Part number: HF7-0B13.\u003c\/p\u003e\u003cp\u003eRear-axle applications only in this reference. Potential applications only; confirm exact trim, axle, tire size and brake\/suspension\/fender clearance when choosing tires. Retail application listings and comparable owner installations do not guarantee clearance on every vehicle.\u003c\/p\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eVehicle group\u003c\/th\u003e\n\u003cth\u003eApplication years\u003c\/th\u003e\n\u003cth\u003eFitment notes\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eChevrolet Camaro\u003c\/td\u003e\n\u003ctd\u003e2010–2015\u003c\/td\u003e\n\u003ctd\u003eExact wheel is listed as a rear application. Verify trim, brake package, ride height and loaded clearance. Installer must confirm tire width and overall diameter when choosing tires; aftermarket suspension can change fitment. Not a verified front application.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eChevrolet Camaro\u003c\/td\u003e\n\u003ctd\u003e2016–2024\u003c\/td\u003e\n\u003ctd\u003eExact wheel is listed as a rear application. Independently confirm SS, 1LE or ZL1 brake and body clearance rather than assuming every package fits identically. Confirm tire size, suspension and fender clearance when choosing tires. Not a verified front application.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eChevrolet Corvette C8\u003c\/td\u003e\n\u003ctd\u003e2020–2026\u003c\/td\u003e\n\u003ctd\u003eExact wheel is listed as a potential rear application, but the listing does not establish individual C8 trim coverage. Do not assume Z06, E-Ray, ZR1 or other widebody compatibility. Confirm exact model, brakes, hub fit and rear wheel\/tire pairing with a qualified installer before purchase. Check required front-to-rear rolling-diameter relationship and electronic-system compatibility when choosing tires.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eChevrolet SS Sedan\u003c\/td\u003e\n\u003ctd\u003e2014–2017\u003c\/td\u003e\n\u003ctd\u003eConditional custom rear application inferred from another wheel design installed in 20×11 +43 with 295\/30R20 tires and rear-fender modification. This +40 wheel extends 3 mm farther outward at the same width, so that installation does not prove clearance here. Fender rolling, pulling, liner work or other body-clearance work may be needed. Confirm loaded fender\/suspension clearance when choosing tires; independently test HF-7 spoke and barrel clearance over the brakes. Not a stock-body bolt-on claim.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003cp\u003eTest-fit wheels before mounting tires. Verify wheel load rating, hub fit and any required hub-centric rings, correct lug hardware and seat type, brake-caliper\/spoke\/barrel clearance, and clearance through full suspension travel. Tire choice cannot resolve wheel-to-brake interference. No front or square setup is established by this chart.\u003c\/p\u003e","brand":"Vossen","offers":[{"title":"Default Title","offer_id":48684588007585,"sku":"VOSHF7-0B13","price":799.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0759\/9905\/1937\/files\/716793427309f21045207ec0fda94c24_6e1867ff-3bd7-4958-af2c-b8d950c9472f.jpg?v=1793723126"},{"product_id":"vossen-hf-7-19x9-5-5x120-et40-deep-face-72-56-silver-polished-wheel","title":"Vossen HF-7 19x9.5 \/ 5x120 \/ ET40 \/ Deep Face \/ 72.56 - Silver Polished Wheel","description":"\u003cp\u003eVossen HF-7 19x9.5 \/ 5x120 \/ ET40 \/ Deep Face \/ 72.56 - Silver Polished\u003c\/p\u003e\n\u003ch3\u003eVehicle Fitment Reference\u003c\/h3\u003e\n\u003cp\u003eSpecifications: 19 × 9.5 inches, 5 × 120 mm bolt pattern, +40 mm offset, 72.56 mm center bore, Deep Face, Silver Polished. Part number: HF7-9B63.\u003c\/p\u003e\n\u003cp\u003ePotential applications only; confirm exact trim, axle, tire size and brake\/suspension\/fender clearance when choosing tires. Retail listings identify potential applications, not verified installations on every trim. Comparable installations of other wheel designs do not establish HF-7 spoke-to-caliper clearance.\u003c\/p\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003eVehicle group\u003c\/th\u003e\n\u003cth\u003eApplication years\u003c\/th\u003e\n\u003cth\u003eFitment notes\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eChevrolet Camaro\u003c\/td\u003e\n\u003ctd\u003e2010–2015\u003c\/td\u003e\n\u003ctd\u003eExact-wheel retailer lists SS, ZL1 from 2012 and 1LE from 2013 as potential applications. Axle placement and specific brake clearance require confirmation; no square setup is established. Check inner suspension and outer fender clearance when choosing tires.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eChevrolet Camaro\u003c\/td\u003e\n\u003ctd\u003e2016–2024\u003c\/td\u003e\n\u003ctd\u003eExact-wheel retailer lists SS, ZL1 and 1LE as potential applications. Verify exact brake package and axle before ordering, especially performance-brake versions. Check tire diameter, suspension and fender clearance when choosing tires; not a blanket all-trim fitment claim.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCadillac CTS-V\u003c\/td\u003e\n\u003ctd\u003e2009–2013\u003c\/td\u003e\n\u003ctd\u003eExact-wheel retailer lists CTS-V as a potential application. Confirm sedan, coupe or wagon, axle placement and brake clearance individually; body styles need not share rear fitment. Check tire diameter and loaded suspension\/fender clearance when choosing tires.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCadillac CTS-V\u003c\/td\u003e\n\u003ctd\u003e2016–2019\u003c\/td\u003e\n\u003ctd\u003eExact-wheel retailer lists CTS-V as a potential application. Independently verify axle and brake clearance rather than transferring fitment from the earlier generation. Check tire size and suspension\/fender clearance when choosing tires.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eChevrolet Corvette C8\u003c\/td\u003e\n\u003ctd\u003e2020–2026\u003c\/td\u003e\n\u003ctd\u003eRetailer lists C8 as a potential application, without establishing axle or individual trim coverage. Do not assume Z06, E-Ray, ZR1 or widebody compatibility. Installer confirmation of axle, wheel load rating, hub and brake clearance is required. Confirm tire pairing, front-to-rear rolling-diameter relationship and electronic-system compatibility when choosing tires.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eChevrolet SS Sedan\u003c\/td\u003e\n\u003ctd\u003e2014–2017\u003c\/td\u003e\n\u003ctd\u003eConditional rear application based on a different wheel installed in 19×9.5 +40 with 275\/35R19 tires on a lowered SS. The owner later rolled rear fenders after rubbing and noted alignment as a factor. This supports dimensional plausibility, not HF-7 brake clearance. Check ride height, alignment and loaded rear-fender clearance when choosing tires. Front use is not established here.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePontiac G8\u003c\/td\u003e\n\u003ctd\u003e2008–2009\u003c\/td\u003e\n\u003ctd\u003eConditional custom rear cross-fitment inferred from comparable Camaro\/SS wheel experience, not an exact HF7-9B63 installation. Wider rear wheels at these offsets can rub under load or over bumps; fender rolling may be required. Independently verify hub fit and HF-7 brake clearance. Confirm tire width, overall diameter and full-compression clearance when choosing tires. Front or square fitment is not established.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eChevrolet Caprice PPV\u003c\/td\u003e\n\u003ctd\u003e2011–2017\u003c\/td\u003e\n\u003ctd\u003eConditional custom rear cross-fitment, not a documented exact-wheel installation. Owners report rear rubbing with narrower 9-inch +40 Camaro wheels; this 9.5-inch wheel at the same offset extends farther both inward and outward. Fender rolling or other clearance work may be required. Check tire load rating, overall diameter and loaded suspension\/fender clearance when choosing tires; independently verify wheel\/brake and hub fit. Front or square fitment is not established.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003eTest-fit before mounting tires. Verify wheel load rating, hub fit and any required hub-centric rings, correct lug hardware and seat type, and spoke\/barrel clearance over the brakes. Check clearance throughout suspension travel and steering where applicable. Tire choice cannot correct wheel-to-brake interference. Modification requirements vary with tire construction, alignment, ride height and vehicle load.\u003c\/p\u003e","brand":"Vossen","offers":[{"title":"Default Title","offer_id":48684636012705,"sku":"VOSHF7-9B63","price":649.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0759\/9905\/1937\/files\/716793427309f21045207ec0fda94c24_168880d5-ea32-4170-a40a-76b49dcf542d.jpg?v=1793723149"},{"product_id":"vossen-hf-7-19x9-5-5x120-et40-deep-face-72-56-gloss-black-wheel","title":"Vossen HF-7 19x9.5 \/ 5x120 \/ ET40 \/ Deep Face \/ 72.56 - Gloss Black Wheel","description":"Vossen HF-7 19x9.5 \/ 5x120 \/ ET40 \/ Deep Face \/ 72.56 - Gloss Black\u003ch3\u003eVehicle Fitment Reference\u003c\/h3\u003e\u003cp\u003eSpecifications: 19 × 9.5 inches, 5 × 120 mm bolt pattern, +40 mm offset, 72.56 mm center bore, Deep Face, Gloss Black. Part number: HF7-9B64.\u003c\/p\u003e\u003cp\u003ePotential applications only; confirm exact trim, axle, tire size and brake\/suspension\/fender clearance when choosing tires. Retail listings identify potential applications, not verified installations on every trim. Comparable installations of other wheel designs do not establish HF-7 spoke-to-caliper clearance. Matching bolt pattern alone does not establish fitment.\u003c\/p\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eVehicle group\u003c\/th\u003e\n\u003cth\u003eApplication years\u003c\/th\u003e\n\u003cth\u003eFitment notes\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eChevrolet Camaro\u003c\/td\u003e\n\u003ctd\u003e2010–2015\u003c\/td\u003e\n\u003ctd\u003eExact-wheel retailer lists SS, ZL1 from 2012 and 1LE from 2013 as potential applications. Axle placement and specific brake clearance require confirmation; no square setup is established. Check inner suspension and outer fender clearance when choosing tires.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eChevrolet Camaro\u003c\/td\u003e\n\u003ctd\u003e2016–2024\u003c\/td\u003e\n\u003ctd\u003eExact-wheel retailer lists SS, ZL1 and 1LE as potential applications. Verify exact brake package and axle before ordering, especially performance-brake versions. Check tire diameter, suspension and fender clearance when choosing tires; not a blanket all-trim fitment claim.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCadillac CTS-V\u003c\/td\u003e\n\u003ctd\u003e2009–2013\u003c\/td\u003e\n\u003ctd\u003eExact-wheel retailer lists CTS-V as a potential application. Confirm sedan, coupe or wagon, axle placement and brake clearance individually; body styles need not share rear fitment. Check tire diameter and loaded suspension\/fender clearance when choosing tires.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCadillac CTS-V\u003c\/td\u003e\n\u003ctd\u003e2016–2019\u003c\/td\u003e\n\u003ctd\u003eExact-wheel retailer lists CTS-V as a potential application. Independently verify axle and brake clearance rather than transferring fitment from the earlier generation. Check tire size and suspension\/fender clearance when choosing tires.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eChevrolet Corvette C8\u003c\/td\u003e\n\u003ctd\u003e2020–2026\u003c\/td\u003e\n\u003ctd\u003eRetailer lists C8 as a potential application without establishing axle or individual trim coverage. Do not assume Z06, E-Ray or widebody compatibility from the bolt pattern alone. The ZR1 rear uses 5×130 and is excluded. Installer confirmation of axle, wheel load rating, hub and brake clearance is required. Confirm tire pairing, front-to-rear rolling-diameter relationship and electronic-system compatibility when choosing tires.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eChevrolet SS Sedan\u003c\/td\u003e\n\u003ctd\u003e2014–2017\u003c\/td\u003e\n\u003ctd\u003eConditional rear application based on a different wheel installed in 19×9.5 +40 with 275\/35R19 tires on a lowered SS. The owner later rolled rear fenders after rubbing and noted alignment as a factor. This supports dimensional plausibility, not HF-7 brake clearance. Check ride height, alignment and loaded rear-fender clearance when choosing tires. Front use is not established here.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePontiac G8\u003c\/td\u003e\n\u003ctd\u003e2008–2009\u003c\/td\u003e\n\u003ctd\u003eConditional custom rear cross-fitment inferred from comparable Camaro\/SS wheel experience, not an exact HF7-9B64 installation. Wider rear wheels at these offsets can rub under load or over bumps; fender rolling may be required. Independently verify hub fit and HF-7 brake clearance. Confirm tire width, overall diameter and full-compression clearance when choosing tires. Front or square fitment is not established.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eChevrolet Caprice PPV\u003c\/td\u003e\n\u003ctd\u003e2011–2017\u003c\/td\u003e\n\u003ctd\u003eConditional custom rear cross-fitment, not a documented exact-wheel installation. Owners report rear rubbing with narrower 9-inch +40 Camaro wheels; this 9.5-inch wheel at the same offset extends farther both inward and outward. Fender rolling or other clearance work may be required. Check tire load rating, overall diameter and loaded suspension\/fender clearance when choosing tires; independently verify wheel\/brake and hub fit. Front or square fitment is not established.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePontiac GTO\u003c\/td\u003e\n\u003ctd\u003e2004–2006\u003c\/td\u003e\n\u003ctd\u003eBolt-pattern reference only, not a confirmed fitment or collection application. Owners using other 19×9.5 +40 wheels report rear rubbing with 275\/30R19 tires even after fender rolling, with suspension-height changes needed on one setup. This is a custom rear candidate requiring professional measurement and potentially substantial clearance work, not a bolt-on application. Confirm tire size, ride height, alignment and full-compression suspension\/fender clearance when choosing tires. Independently verify hub fit, lug hardware, wheel load rating and HF-7 brake clearance. Front or square fitment is not established.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003cp\u003eC5, C6 and C7 Corvette use 5×120.65, not this wheel's 5×120 pattern, and are not direct-fit applications.\u003c\/p\u003e\u003cp\u003eTest-fit before mounting tires. Verify wheel load rating, hub fit and any required hub-centric rings, correct lug hardware and seat type, and spoke\/barrel clearance over the brakes. Check clearance throughout suspension travel and steering where applicable. Tire choice cannot correct wheel-to-brake interference. Modification requirements vary with tire construction, alignment, ride height and vehicle load.\u003c\/p\u003e","brand":"Vossen","offers":[{"title":"Default Title","offer_id":48685268992161,"sku":"VOSHF7-9B64","price":649.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0759\/9905\/1937\/files\/f5709f6dd0f75b6e1d6af2c5bfad7197_9d95c3bf-b3a8-47c7-8557-f0e7f7f20bf4.jpg?v=1793723558"},{"product_id":"vossen-hf-5-20x11-5x120-et40-deep-face-72-56-gloss-black-wheel","title":"Vossen HF-5 20x11 \/ 5x120 \/ ET40 \/ Deep Face \/ 72.56 - Gloss Black Wheel","description":"Vossen HF-5 20x11 \/ 5x120 \/ ET40 \/ Deep Face \/ 72.56 - Gloss Black\u003ch3\u003eVehicle Fitment Reference\u003c\/h3\u003e\u003cp\u003eSpecifications: 20 × 11 inches, 5 × 120 mm bolt pattern, +40 mm offset, 72.56 mm center bore, Deep Face, Gloss Black. Part number: HF5-0B18.\u003c\/p\u003e\u003cp\u003ePotential applications only; confirm exact trim, axle, tire size and brake\/suspension\/fender clearance when choosing tires. Retail listings and comparable installations do not guarantee fitment on every trim. Matching bolt pattern alone does not establish clearance. Entries marked bolt-pattern reference only are not established fitments or collection applications.\u003c\/p\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eVehicle group\u003c\/th\u003e\n\u003cth\u003eYears\u003c\/th\u003e\n\u003cth\u003eFitment status and restrictions\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eChevrolet Camaro\u003c\/td\u003e\n\u003ctd\u003e2010–2015\u003c\/td\u003e\n\u003ctd\u003eExact part is listed as the rear wheel in a Camaro staggered HF-5 package. Confirm trim, brake package and ride height individually. Verify tire width, overall diameter, load rating and full-compression clearance when choosing tires. Front or square fitment is not established.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eChevrolet Camaro\u003c\/td\u003e\n\u003ctd\u003e2016–2024\u003c\/td\u003e\n\u003ctd\u003eExact part is listed as the rear wheel in a Camaro staggered HF-5 package. Independently confirm SS, ZL1, 1LE or other specific package rather than assuming identical clearance. Check tire diameter, load rating and loaded suspension\/fender clearance when choosing tires. No front or square setup is established.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCadillac CTS-V\u003c\/td\u003e\n\u003ctd\u003e2016–2019\u003c\/td\u003e\n\u003ctd\u003eExact-part retailer application list includes this generation. Treat as a potential application requiring axle-specific verification, not proof of clearance. Confirm hub fit, brake clearance and wheel load rating independently. Check tire size and full-compression suspension\/fender clearance when choosing tires.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eChevrolet Corvette C8\u003c\/td\u003e\n\u003ctd\u003e2020–2026\u003c\/td\u003e\n\u003ctd\u003eExact-wheel retailer lists a rear application excluding Z06. Treat as a potential Stingray rear application requiring installer confirmation; do not extend the claim to E-Ray or other widebody variants. ZR1 rear uses 5×130 and is excluded. Confirm hub fit, brakes and wheel load rating. Verify tire pairing, front-to-rear rolling-diameter relationship, electronic-system compatibility and body clearance when choosing tires.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eChevrolet SS Sedan\u003c\/td\u003e\n\u003ctd\u003e2014–2017\u003c\/td\u003e\n\u003ctd\u003eConditional custom rear application inferred from another wheel design installed in 20×11 +43 with 295\/30R20 tires and rear-fender modification. This +40 wheel extends 3 mm farther outward at the same width, so that setup does not prove clearance here. Fender rolling, pulling, liner work or other body-clearance work may be needed. Confirm loaded fender\/suspension clearance when choosing tires; independently test HF-5 spoke\/barrel clearance over the brakes. Not a stock-body bolt-on claim; front use is not established.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCadillac CTS-V\u003c\/td\u003e\n\u003ctd\u003e2009–2013\u003c\/td\u003e\n\u003ctd\u003eBolt-pattern reference only. The exact-part application evidence reviewed does not establish this earlier generation or its sedan\/coupe\/wagon body styles. No axle fitment is confirmed. Specialist wheel\/brake, hub and body-clearance verification is required. Confirm tire size, load rating and full-travel clearance when choosing tires.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePontiac G8\u003c\/td\u003e\n\u003ctd\u003e2008–2009\u003c\/td\u003e\n\u003ctd\u003eBolt-pattern reference only. A reported 11-inch rear setup at +52 used rolled fenders; this +40 wheel extends farther outward at the same width and is not established by that report. Do not assume rolling alone makes it fit. Confirm axle, wheel\/brake and hub compatibility professionally, and assess tire size and loaded body clearance when choosing tires.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eChevrolet Caprice PPV\u003c\/td\u003e\n\u003ctd\u003e2011–2017\u003c\/td\u003e\n\u003ctd\u003eBolt-pattern reference only. Owner guidance favors higher offsets for wide rears and reports rubbing with narrower Camaro wheels. This 11-inch +40 wheel is not established as a workable application. Professional wheel\/brake, hub and body-clearance assessment is required; fender work may not be sufficient. Check tire load rating, diameter and full-compression clearance when choosing tires.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePontiac GTO\u003c\/td\u003e\n\u003ctd\u003e2004–2006\u003c\/td\u003e\n\u003ctd\u003eBolt-pattern reference only. Reports of rubbing with narrower 9.5-inch +40 wheels do not establish this 11-inch wheel fits. No front, rear or square application is confirmed. Specialist wheel\/brake, hub and body-clearance assessment is required. Confirm feasible tire size, load rating and full-travel clearance when choosing tires.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003cp\u003eC5, C6 and C7 Corvette use 5×120.65 rather than this wheel's 5×120 pattern and are not direct-fit applications. First-generation CTS-V uses a different six-lug pattern and is excluded.\u003c\/p\u003e\u003cp\u003eTest-fit before mounting tires. Verify wheel load rating, correct lug hardware and seat type, thread engagement, hub fit and any required hub-centric rings, and spoke\/barrel clearance over the brakes. Check clearance throughout suspension travel and steering where applicable. Tire choice cannot resolve wheel-to-brake interference. Modification requirements must be evaluated on the individual vehicle rather than assumed to make an unverified application fit.\u003c\/p\u003e","brand":"Vossen","offers":[{"title":"Default Title","offer_id":48686804566177,"sku":"VOSHF5-0B18","price":799.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0759\/9905\/1937\/files\/5ea4a3c1a71bf5d70db49ced110df86f_2d42c7ef-facf-4026-8df7-e903d1cbb5d2.jpg?v=1793724576"},{"product_id":"vossen-hf-5-20x10-5-5x120-et42-deep-face-72-56-gloss-black-wheel","title":"Vossen HF-5 20x10.5 \/ 5x120 \/ ET42 \/ Deep Face \/ 72.56 - Gloss Black Wheel","description":"Vossen HF-5 20x10.5 \/ 5x120 \/ ET42 \/ Deep Face \/ 72.56 - Gloss Black\u003ch3\u003eVehicle Fitment Reference\u003c\/h3\u003e\u003cp\u003eSpecifications: 20 × 10.5 inches, 5 × 120 mm bolt pattern, +42 mm offset, 72.56 mm center bore, Deep Face, Gloss Black. Part number: HF5-0B07.\u003c\/p\u003e\u003cp\u003ePotential applications only; confirm exact trim, axle, tire size and brake\/suspension\/fender clearance when choosing tires. Retail listings and comparable installations do not guarantee fitment on every trim. Other wheel designs with identical dimensions do not establish HF-5 spoke-to-caliper clearance. Bolt-pattern reference entries are not confirmed fitments or collection applications.\u003c\/p\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eVehicle group\u003c\/th\u003e\n\u003cth\u003eYears\u003c\/th\u003e\n\u003cth\u003eFitment status and restrictions\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eChevrolet Camaro\u003c\/td\u003e\n\u003ctd\u003e2010–2015\u003c\/td\u003e\n\u003ctd\u003eExact-wheel retailer lists SS, ZL1 from 2012 and 1LE from 2013 as potential applications. Confirm axle, exact brake package and ride height individually. Check tire diameter, approved rim width, load rating and full-travel clearance when choosing tires. No front or square setup is established.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eChevrolet Camaro\u003c\/td\u003e\n\u003ctd\u003e2016–2024\u003c\/td\u003e\n\u003ctd\u003eExact-wheel retailer lists SS, ZL1 and 1LE as potential applications. Confirm axle and specific brake package before purchase rather than assuming all trims share clearance. Check tire size, load rating and loaded suspension\/fender clearance when choosing tires. No complete staggered or square setup is established here.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCadillac CTS-V\u003c\/td\u003e\n\u003ctd\u003e2009–2013\u003c\/td\u003e\n\u003ctd\u003eExact-wheel retailer lists CTS-V as a potential application without establishing axle or body-style coverage. Confirm sedan, coupe or wagon, hub fit and brake clearance individually. Check tire size, load rating and full-compression suspension\/fender clearance when choosing tires.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCadillac CTS-V\u003c\/td\u003e\n\u003ctd\u003e2016–2019\u003c\/td\u003e\n\u003ctd\u003eExact-wheel retailer lists CTS-V as a potential application. Installer verification of axle, hub fit, wheel load rating and brake clearance is required. Check tire diameter, load rating and full-travel clearance when choosing tires; earlier-generation fitment does not establish this generation's clearance.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eChevrolet Corvette C8\u003c\/td\u003e\n\u003ctd\u003e2020–2026\u003c\/td\u003e\n\u003ctd\u003eExact-wheel retailer lists C8 as a potential application without confirming axle or individual trim coverage. Do not assume Stingray, Z06, E-Ray or widebody compatibility. ZR1 rear uses 5×130 and is excluded. Independently verify axle, wheel\/brake clearance, hub fit and load rating. Confirm tire pairing, front-to-rear rolling-diameter relationship, electronic-system compatibility and loaded clearance when choosing tires.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eChevrolet SS Sedan\u003c\/td\u003e\n\u003ctd\u003e2014–2017\u003c\/td\u003e\n\u003ctd\u003eConditional custom rear application based on other wheel designs documented in the SS wheel directory in 20×10.5 +42. Matching dimensions support plausibility, not HF-5 brake clearance or a guaranteed stock-body fit. Fender rolling, liner\/body-clearance work or alignment adjustments may be needed depending on the vehicle and tire. Confirm ride height, tire diameter, load rating and loaded fender\/suspension clearance when choosing tires. Independently test wheel\/brake and hub fit; front or square fitment is not established.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePontiac G8\u003c\/td\u003e\n\u003ctd\u003e2008–2009\u003c\/td\u003e\n\u003ctd\u003eBolt-pattern reference only. A different Vossen installation used a 20×10.5 rear with an effective +45 offset, coilovers and rolled fenders, with some rubbing reported. This +42 configuration sits farther outward at the same width and is not established by that installation. Specialist measurement is required. Verify wheel\/brake and hub fit independently; assess tire size and full-compression clearance when choosing tires.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eChevrolet Caprice PPV\u003c\/td\u003e\n\u003ctd\u003e2011–2017\u003c\/td\u003e\n\u003ctd\u003eBolt-pattern reference only. Owner guidance favors higher offsets for wide rear wheels and reports rubbing with narrower Camaro setups. This 10.5-inch +42 HF-5 is not established as a workable application. Specialist wheel\/brake, hub and body-clearance assessment is required; fender rolling may not be sufficient. Check tire load rating, diameter and loaded clearance when choosing tires.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePontiac GTO\u003c\/td\u003e\n\u003ctd\u003e2004–2006\u003c\/td\u003e\n\u003ctd\u003eBolt-pattern reference only. Reports of rubbing with narrower 9.5-inch +40 wheels do not establish this wider wheel fits. No front, rear or square application is confirmed. Specialist wheel\/brake, hub and body-clearance assessment is required. Confirm feasible tire size, load rating and full-travel clearance when choosing tires.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003cp\u003eC5, C6 and C7 Corvette use 5×120.65 rather than this wheel's 5×120 pattern and are not direct-fit applications. First-generation CTS-V uses a different six-lug pattern and is excluded.\u003c\/p\u003e\u003cp\u003eTest-fit before mounting tires. Verify wheel load rating, correct lug hardware and seat type, thread engagement, hub fit and any required hub-centric rings, and spoke\/barrel clearance over the brakes. Check clearance throughout suspension travel and steering where applicable. Tire choice cannot resolve wheel-to-brake interference. Modification requirements must be evaluated on the individual vehicle rather than assumed to make an unverified application fit.\u003c\/p\u003e","brand":"Vossen","offers":[{"title":"Default Title","offer_id":48687077851297,"sku":"VOSHF5-0B07","price":799.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0759\/9905\/1937\/files\/5ea4a3c1a71bf5d70db49ced110df86f_33c86765-a885-4fbe-bac1-328adadc1770.jpg?v=1793724724"},{"product_id":"vossen-hf-5-20x11-5x120-et40-deep-face-72-56-matte-gunmetal-wheel","title":"Vossen HF-5 20x11 \/ 5x120 \/ ET40 \/ Deep Face \/ 72.56 - Matte Gunmetal Wheel","description":"Vossen HF-5 20x11 \/ 5x120 \/ ET40 \/ Deep Face \/ 72.56 - Matte Gunmetal\u003ch3\u003eVehicle Fitment Reference\u003c\/h3\u003e\u003cp\u003eSpecifications: 20 × 11 inches, 5 × 120 mm bolt pattern, +40 mm offset, 72.56 mm center bore, Deep Face, Matte Gunmetal. Part number: HF5-0B19.\u003c\/p\u003e\u003cp\u003ePotential applications only; confirm exact trim, axle, tire size and brake\/suspension\/fender clearance when choosing tires. Retail listings and comparable installations do not guarantee fitment on every trim. Other wheel designs with matching dimensions do not establish HF-5 spoke-to-caliper clearance. Entries marked bolt-pattern reference only are not established fitments or collection applications.\u003c\/p\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eVehicle group\u003c\/th\u003e\n\u003cth\u003eYears\u003c\/th\u003e\n\u003cth\u003eFitment status and restrictions\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eChevrolet Camaro\u003c\/td\u003e\n\u003ctd\u003e2010–2015\u003c\/td\u003e\n\u003ctd\u003eExact part is listed as a rear application. Confirm trim, brake package and ride height individually. Verify tire width, diameter, load rating and full-compression clearance when choosing tires. The retailer specifies smaller acorn-style lug nuts rather than factory lug nuts; confirm correct seat, thread and engagement. Front or square fitment is not established.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eChevrolet Camaro\u003c\/td\u003e\n\u003ctd\u003e2016–2024\u003c\/td\u003e\n\u003ctd\u003eExact part is listed as a rear application. Independently confirm SS, ZL1, 1LE or other specific package rather than assuming identical clearance. Check tire diameter, load rating and loaded suspension\/fender clearance when choosing tires. The retailer specifies smaller acorn-style lug nuts rather than factory lug nuts; confirm correct seat, thread and engagement. No front or square setup is established.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCadillac CTS-V\u003c\/td\u003e\n\u003ctd\u003e2016–2019\u003c\/td\u003e\n\u003ctd\u003ePotential application inferred from a retailer application list for the same HF-5 dimensions and Deep Face profile in Gloss Black, not a documented installation of this Matte Gunmetal part. Confirm axle, hub fit, wheel load rating and brake clearance independently. Check tire size and full-compression suspension\/fender clearance when choosing tires.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eChevrolet Corvette C8\u003c\/td\u003e\n\u003ctd\u003e2020–2026\u003c\/td\u003e\n\u003ctd\u003eExact part is listed as a rear application, but individual trim coverage requires confirmation. Treat as a potential Stingray rear application; do not assume Z06, E-Ray or other widebody compatibility. ZR1 rear uses 5×130 and is excluded. Confirm hub fit, brakes and wheel load rating. Verify tire pairing, front-to-rear rolling-diameter relationship, electronic-system compatibility and body clearance when choosing tires. Confirm the correctly specified smaller acorn-style lug hardware before installation.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eChevrolet SS Sedan\u003c\/td\u003e\n\u003ctd\u003e2014–2017\u003c\/td\u003e\n\u003ctd\u003eConditional custom rear application inferred from another wheel design installed in 20×11 +43 with 295\/30R20 tires and rear-fender modification. This +40 wheel extends 3 mm farther outward at the same width, so that setup does not prove clearance here. Fender rolling, pulling, liner work or other body-clearance work may be needed. Confirm loaded fender\/suspension clearance when choosing tires; independently test HF-5 spoke\/barrel clearance over the brakes. Not a stock-body bolt-on claim; front use is not established.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCadillac CTS-V\u003c\/td\u003e\n\u003ctd\u003e2009–2013\u003c\/td\u003e\n\u003ctd\u003eBolt-pattern reference only. The application evidence reviewed does not establish this earlier generation or its sedan\/coupe\/wagon body styles for this configuration. No axle fitment is confirmed. Specialist wheel\/brake, hub and body-clearance verification is required. Confirm tire size, load rating and full-travel clearance when choosing tires.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePontiac G8\u003c\/td\u003e\n\u003ctd\u003e2008–2009\u003c\/td\u003e\n\u003ctd\u003eBolt-pattern reference only. A reported 11-inch rear setup at +52 used rolled fenders; this +40 wheel extends farther outward at the same width and is not established by that report. Do not assume rolling alone makes it fit. Confirm axle, wheel\/brake and hub compatibility professionally, and assess tire size and loaded body clearance when choosing tires.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eChevrolet Caprice PPV\u003c\/td\u003e\n\u003ctd\u003e2011–2017\u003c\/td\u003e\n\u003ctd\u003eBolt-pattern reference only. Owner guidance favors higher offsets for wide rears and reports rubbing with narrower Camaro wheels. This 11-inch +40 wheel is not established as a workable application. Professional wheel\/brake, hub and body-clearance assessment is required; fender work may not be sufficient. Check tire load rating, diameter and full-compression clearance when choosing tires.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePontiac GTO\u003c\/td\u003e\n\u003ctd\u003e2004–2006\u003c\/td\u003e\n\u003ctd\u003eBolt-pattern reference only. Reports of rubbing with narrower 9.5-inch +40 wheels do not establish this 11-inch wheel fits. No front, rear or square application is confirmed. Specialist wheel\/brake, hub and body-clearance assessment is required. Confirm feasible tire size, load rating and full-travel clearance when choosing tires.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003cp\u003eC5, C6 and C7 Corvette use 5×120.65 rather than this wheel's 5×120 pattern and are not direct-fit applications. First-generation CTS-V uses a different six-lug pattern and is excluded.\u003c\/p\u003e\u003cp\u003eTest-fit before mounting tires. Verify wheel load rating, correct lug hardware and seat type, thread engagement, hub fit and any required hub-centric rings, and spoke\/barrel clearance over the brakes. Check clearance throughout suspension travel and steering where applicable. Tire choice cannot resolve wheel-to-brake interference. Modification requirements must be evaluated on the individual vehicle rather than assumed to make an unverified application fit.\u003c\/p\u003e","brand":"Vossen","offers":[{"title":"Default Title","offer_id":48687343599777,"sku":"VOSHF5-0B19","price":799.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0759\/9905\/1937\/files\/33e4765f623a936e8d60fdb86a018c3d_b959c133-8107-4469-bfb3-8c2af1ae7439.jpg?v=1793724888"},{"product_id":"vossen-hf-5-20x10-5x120-et45-deep-face-72-56-gloss-black-wheel","title":"Vossen HF-5 20x10 \/ 5x120 \/ ET45 \/ Deep Face \/ 72.56 - Gloss Black Wheel","description":"Vossen HF-5 20x10 \/ 5x120 \/ ET45 \/ Deep Face \/ 72.56 - Gloss Black\u003ch3\u003eVehicle Fitment Reference\u003c\/h3\u003e\u003cp\u003eSpecifications: 20 × 10 inches, 5 × 120 mm bolt pattern, +45 mm offset, 72.56 mm center bore, Deep Face, Gloss Black. Part number: HF5-0B04.\u003c\/p\u003e\u003cp\u003ePotential applications only; confirm exact trim, axle, tire size and brake\/suspension\/fender clearance when choosing tires. Retail listings and comparable installations do not guarantee fitment on every trim. Other wheel designs with similar dimensions do not establish HF-5 spoke-to-caliper clearance. Matching bolt pattern alone does not establish fitment.\u003c\/p\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eVehicle group\u003c\/th\u003e\n\u003cth\u003eYears\u003c\/th\u003e\n\u003cth\u003eFitment status and restrictions\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eChevrolet Camaro\u003c\/td\u003e\n\u003ctd\u003e2010–2015\u003c\/td\u003e\n\u003ctd\u003eExact-wheel retailer lists SS, ZL1 from 2012 and 1LE from 2013 as potential applications. Confirm axle, brake package and ride height individually. Check tire diameter, approved rim width, load rating and full-compression clearance when choosing tires. Front or square fitment is not established.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eChevrolet Camaro\u003c\/td\u003e\n\u003ctd\u003e2016–2024\u003c\/td\u003e\n\u003ctd\u003eExact-wheel retailer lists SS, ZL1 and 1LE as potential applications. Independently confirm axle and exact brake package; do not assume all trims share clearance. Check tire size, load rating and loaded suspension\/fender clearance when choosing tires. No complete staggered or square setup is established here.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCadillac CTS-V\u003c\/td\u003e\n\u003ctd\u003e2009–2013\u003c\/td\u003e\n\u003ctd\u003eExact-wheel retailer lists CTS-V as a potential application without establishing axle or body-style coverage. Confirm sedan, coupe or wagon, hub fit and brake clearance individually. Check tire size, load rating and full-compression suspension\/fender clearance when choosing tires.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCadillac CTS-V\u003c\/td\u003e\n\u003ctd\u003e2016–2019\u003c\/td\u003e\n\u003ctd\u003eExact-wheel retailer lists CTS-V as a potential application. Installer verification of axle, hub fit, wheel load rating and brake clearance is required. Check tire diameter, load rating and full-travel clearance when choosing tires; earlier-generation fitment does not establish this generation's clearance.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eChevrolet Corvette C8\u003c\/td\u003e\n\u003ctd\u003e2020–2026\u003c\/td\u003e\n\u003ctd\u003eExact-wheel retailer lists C8 as a potential application without confirming axle or individual trim coverage. Do not assume Stingray, Z06, E-Ray or widebody compatibility. ZR1 rear uses 5×130 and is excluded. Confirm axle, wheel\/brake clearance, hub fit and load rating with a specialist. Verify tire pairing, front-to-rear rolling-diameter relationship, electronic-system compatibility and body clearance when choosing tires.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eChevrolet SS Sedan\u003c\/td\u003e\n\u003ctd\u003e2014–2017\u003c\/td\u003e\n\u003ctd\u003eConditional custom rear application inferred from SS directory installations of other 20×10 wheels at +38, +40 and +42 offsets. This +45 wheel sits farther inward at the same width, so inner suspension clearance must be checked independently. Those installations do not prove HF-5 brake clearance or no-rub fitment. Fender rolling or other clearance work may be needed depending on tire and ride height. Confirm tire diameter, load rating and loaded fender\/suspension clearance when choosing tires. Front or square fitment is not established.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePontiac G8\u003c\/td\u003e\n\u003ctd\u003e2008–2009\u003c\/td\u003e\n\u003ctd\u003eConditional rear application based on community discussion of 20×10 wheels at +45 or higher and comparable 20-inch rear installations, not an exact HF5-0B04 installation record. Fender rolling and tire-dependent clearance work may be needed, especially when lowered or loaded. Independently verify hub fit, inner suspension clearance and HF-5 brake clearance. Confirm tire size, load rating and full-compression clearance when choosing tires. Front or square fitment is not established.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eChevrolet Caprice PPV\u003c\/td\u003e\n\u003ctd\u003e2011–2017\u003c\/td\u003e\n\u003ctd\u003eConditional custom rear application based on owner guidance favoring 20×10 rear wheels around +45 to +50 with fender rolling; +50 was described as the safer clearance choice. This is not proof of an exact HF-5 installation. Rear-fender rolling or other body-clearance work may be required. Confirm ride height, vehicle load, tire diameter, load rating and full-compression clearance when choosing tires; independently test wheel\/brake and hub compatibility. Front or square fitment is not established.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePontiac GTO\u003c\/td\u003e\n\u003ctd\u003e2004–2006\u003c\/td\u003e\n\u003ctd\u003eBolt-pattern reference only, not an established fitment or collection application. Reports of rubbing with other narrower rear setups do not establish this 20×10 +45 wheel fits. No front, rear or square application is confirmed. Specialist wheel\/brake, hub, suspension and body-clearance assessment is required. Confirm feasible tire size, load rating and full-travel clearance when choosing tires.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003cp\u003eC5, C6 and C7 Corvette use 5×120.65 rather than this wheel's 5×120 pattern and are not direct-fit applications. First-generation CTS-V uses a different six-lug pattern and is excluded.\u003c\/p\u003e\u003cp\u003eTest-fit before mounting tires. Verify wheel load rating, correct lug hardware and seat type, thread engagement, hub fit and any required hub-centric rings, and spoke\/barrel clearance over the brakes. Check clearance throughout suspension travel and steering where applicable. Tire choice cannot resolve wheel-to-brake interference. Modification requirements must be evaluated on the individual vehicle rather than assumed to make an unverified application fit.\u003c\/p\u003e","brand":"Vossen","offers":[{"title":"Default Title","offer_id":48688374677665,"sku":"VOSHF5-0B04","price":749.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0759\/9905\/1937\/files\/5ea4a3c1a71bf5d70db49ced110df86f_bd52c519-8512-40a1-a712-7f97cedb9f2f.jpg?v=1793725640"},{"product_id":"vossen-hf-5-20x10-5x120-et45-deep-face-72-56-matte-gunmetal-wheel","title":"Vossen HF-5 20x10 \/ 5x120 \/ ET45 \/ Deep Face \/ 72.56 - Matte Gunmetal Wheel","description":"Vossen HF-5 20x10 \/ 5x120 \/ ET45 \/ Deep Face \/ 72.56 - Matte Gunmetal\u003ch3\u003eVehicle Fitment Reference\u003c\/h3\u003e\u003cp\u003eSpecifications: 20 × 10 inches, 5 × 120 mm bolt pattern, +45 mm offset, 72.56 mm center bore, Deep Face, Matte Gunmetal. Part number: HF5-0B05.\u003c\/p\u003e\u003cp\u003ePotential applications only; confirm exact trim, axle, tire size and brake\/suspension\/fender clearance when choosing tires. Comparable installations and matching specifications do not guarantee this wheel's fitment or spoke-to-caliper clearance. Matching bolt pattern alone does not establish fitment.\u003c\/p\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eVehicle group\u003c\/th\u003e\n\u003cth\u003eYears\u003c\/th\u003e\n\u003cth\u003eFitment status and restrictions\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eChevrolet Camaro\u003c\/td\u003e\n\u003ctd\u003e2010–2015\u003c\/td\u003e\n\u003ctd\u003ePotential SS application based on the matching Gloss Black HF-5 configuration; ZL1 from 2012 and 1LE from 2013 require individual checks. Confirm axle, brake package, Deep Face clearance and ride height. Front or square fitment is not established. Check tire diameter, approved rim width, load rating and full-compression clearance when choosing tires.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eChevrolet Camaro\u003c\/td\u003e\n\u003ctd\u003e2016–2024\u003c\/td\u003e\n\u003ctd\u003ePotential SS, ZL1 and 1LE application based on the matching Gloss Black configuration. Independently verify axle, exact brake package and hub fit. No complete staggered or square setup is established. Check tire diameter, load rating and loaded suspension\/fender clearance when choosing tires.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCadillac CTS-V\u003c\/td\u003e\n\u003ctd\u003e2009–2013\u003c\/td\u003e\n\u003ctd\u003ePotential application based on the matching Gloss Black configuration; axle and body-style coverage are not established. Confirm sedan, coupe or wagon, hub fit and brake clearance individually. Check tire size, load rating and full-compression suspension\/fender clearance when choosing tires.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCadillac CTS-V\u003c\/td\u003e\n\u003ctd\u003e2016–2019\u003c\/td\u003e\n\u003ctd\u003ePotential application based on the matching Gloss Black configuration. Verify axle, hub fit, wheel load rating and brake clearance independently. Earlier-generation fitment does not establish this generation's clearance. Check tire diameter and full-travel clearance when choosing tires.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eChevrolet Corvette C8\u003c\/td\u003e\n\u003ctd\u003e2020–2026\u003c\/td\u003e\n\u003ctd\u003ePotential application based on the matching Gloss Black configuration, without axle or trim confirmation. Do not assume Stingray, Z06, E-Ray or widebody compatibility. ZR1 rear uses 5×130 and is excluded. Verify axle, wheel\/brake clearance, hub fit and load rating with a specialist. Confirm tire pairing, front-to-rear rolling-diameter relationship, electronic-system compatibility and body clearance when choosing tires.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eChevrolet SS Sedan\u003c\/td\u003e\n\u003ctd\u003e2014–2017\u003c\/td\u003e\n\u003ctd\u003eConditional custom rear application inferred from other 20×10 rear installations at +38, +40 and +42 offsets. This +45 wheel sits farther inward at the same width, requiring independent inner-suspension checks. These are not exact HF5-0B05 installation records and do not establish HF-5 brake clearance. Fender rolling or other clearance work may be required depending on tire and ride height. Confirm tire diameter, load rating and loaded clearance when choosing tires. Front or square fitment is not established.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePontiac G8\u003c\/td\u003e\n\u003ctd\u003e2008–2009\u003c\/td\u003e\n\u003ctd\u003eConditional rear application based on community offset guidance for 10-inch rear wheels, commonly around +45, not an exact HF5-0B05 installation. Fender rolling or tire-dependent clearance work may be needed, especially when lowered or loaded. Verify hub fit, inner suspension and HF-5 brake clearance independently. Confirm tire diameter, load rating and full-compression clearance when choosing tires. Front or square fitment is not established.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eChevrolet Caprice PPV\u003c\/td\u003e\n\u003ctd\u003e2011–2017\u003c\/td\u003e\n\u003ctd\u003eConditional custom rear application based on owner guidance for 20×10 rear wheels around +45 to +50 with fender rolling; +50 was described as the safer clearance choice. This is not an exact HF-5 installation record. Rear-fender rolling or other body-clearance work may be required. Confirm ride height, vehicle load, tire diameter, load rating and full-compression clearance when choosing tires. Independently verify wheel\/brake and hub compatibility. Front or square fitment is not established.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePontiac GTO\u003c\/td\u003e\n\u003ctd\u003e2004–2006\u003c\/td\u003e\n\u003ctd\u003eBolt-pattern reference only, not an established fitment or collection application. No front, rear or square application is established for this exact configuration. Specialist wheel\/brake, hub, suspension and body-clearance assessment is required. Confirm feasible tire size, load rating and full-travel clearance when choosing tires.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003cp\u003eC5, C6 and C7 Corvette use 5×120.65 rather than this wheel's 5×120 pattern and are not direct-fit applications. First-generation CTS-V uses a different six-lug pattern and is excluded.\u003c\/p\u003e\u003cp\u003eTest-fit before mounting tires. Verify wheel load rating, correct lug hardware and seat type, thread engagement, hub fit and any required hub-centric rings, and spoke\/barrel clearance over the brakes. Check clearance throughout suspension travel and steering where applicable. Tire choice cannot resolve wheel-to-brake interference. Modifications must be assessed on the individual vehicle rather than assumed to make an unverified application fit.\u003c\/p\u003e","brand":"Vossen","offers":[{"title":"Default Title","offer_id":48688869998753,"sku":"VOSHF5-0B05","price":749.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0759\/9905\/1937\/files\/33e4765f623a936e8d60fdb86a018c3d_1b1247a6-4765-48f5-9326-bfda514d08d4.jpg?v=1793725934"}],"url":"https:\/\/www.davescustomparts.com\/collections\/chevy-ss-sedan-2014-2017-wheels-tire-upgrades.oembed","provider":"Dave's Custom Parts","version":"1.0","type":"link"}