Brake Pad and Rotor Bedding Procedure

New brake pads and rotors need a break-in period to establish an even layer of friction material on the rotor surfaces. For street-use pads and rotors supplied with a gentle-driving break-in recommendation, follow the procedure below.

Before you start

Confirm that your brakes have been correctly installed and inspected, with a firm brake pedal and no fluid leaks. If the instructions supplied with your specific pads or rotors call for a different bedding method, follow those instructions instead.

For Brembo-caliper brake kits: the caliper brand alone does not determine the bedding procedure. The pad compound and rotor combination matter. This gentle-driving procedure is not a universal Brembo pad or track-pad bedding procedure.

Break-in procedure: first 400–500 miles

  1. Drive safely and normally. Allow 400–500 miles of normal driving for the pads and rotors to bed together.
  2. Use smooth, gradual braking. Allow the pads to progressively establish a friction-material transfer layer on the rotors through normal braking.
  3. Avoid aggressive braking during break-in. Do not deliberately slam on the brakes or perform repeated hard stops as part of this method. Always brake as hard as necessary to avoid an accident; safety takes priority over bedding.
  4. Monitor how the brakes feel. Some temporary noise, odor, or additional brake dust may occur during bedding. Do not assume persistent smoke, severe vibration, pulling, a soft pedal, or reduced stopping ability is normal. Stop safely and have the system inspected if a problem develops.

After break-in

Once the break-in mileage is complete, the pads and rotors should have had the opportunity to establish their working surfaces. If vibration, noise, or poor braking persists, have a qualified brake technician inspect the installation rather than attempting to cure the problem with harder stops.

Not sure which procedure your kit needs?

Contact Dave’s Custom Parts with your order number, vehicle year and model, and pad and rotor details before attempting a different bedding procedure. Track compounds and other specialized combinations may require a different process.