AutoTecknic USA
Volk Racing TE37 Saga SL 18x9.5 5x114.3 +22 Dash White (Set of 4)
Volk Racing TE37 Saga SL 18x9.5 5x114.3 +22 Dash White (Set of 4)
Couldn't load pickup availability
The Volk Racing TE37 Saga SL is a forged six-spoke wheel from RAYS, built in Japan. This listing is for a set of four wheels in 18x9.5, +22 offset, 5x114.3 bolt pattern, finished in Dash White. The SL construction keeps weight low while holding up to street and track use. This is a square setup, same size at all four corners, with a deep concave Face-4 profile. Each wheel ships with the Volk Racing spoke sticker and manual set.
Specifications
- Model: Volk Racing TE37 Saga SL
- Diameter: 18 in
- Width: 9.5 in
- Offset: +22
- Bolt Pattern: 5x114.3
- Hub Bore: 73.1 mm
- Color: Dash White (DW)
- Construction: Forged 1-piece
- Face: Concave Face-4
- Origin: Made in Japan
- Quantity: Set of 4
- Included: Volk Racing spoke sticker and manual set (17/18 inch) per wheel, valve stems
Fitment
18x9.5, +22 offset, 5x114.3, 73.1mm hub bore. Square setup, same size at all four corners. Commonly fitted to Toyota GR Corolla, Mitsubishi Lancer Evolution, Acura TSX, and Acura TL, among other 5x114.3 platforms. On the Evo, the deep concave face may require small spacers for clearance. Buyer must confirm fitment against their specific vehicle before purchase.
Fitment Disclaimer
Fitment varies by vehicle, suspension setup, and tire choice. Confirm clearance for your specific application before purchase. Buyer is responsible for verifying fitment.
Returns
All wheel sales are final once mounted, installed, or fitted with tires. Unmounted wheels in original, unused condition with all packaging may be returned within 30 days of delivery and are subject to a restocking fee. Return shipping is the buyer's responsibility. Inspect all wheels upon arrival and report any damage or discrepancy before mounting.
Vehicle Fitment Reference
TE37 Saga SL, set of four 18×9.5 +22 wheels, 5×114.3, 73.1 mm hub bore, Face-4, Dash White. Square describes identical wheel specifications, not guaranteed fitment at every corner.
Potential applications only; confirm exact trim, axle, tire size and brake/suspension/fender clearance when choosing tires. Earlier TE37 installations support dimensional plausibility, not guaranteed Saga SL spoke/caliper clearance. Reference-only rows are not collection assignments.
| Vehicle group | Years | Fitment status and restrictions |
|---|---|---|
| Ford Mustang / Shelby | 2005–2014 | Conditional modified-fitment candidate based on a reported 2005 Mustang TE37 installation with 18×9.5 +22 fronts and 18×10.5 +22 rears, with fender rolling discussed as necessary. That is a different TE37 configuration and a staggered installation, not proof of this Saga SL square set. Independently assess rear 9.5-inch placement, both axles' Face-4 brake clearance, hub fit, lug compatibility, wheel load rating, alignment and fender coverage. Do not assume GT500 clearance. Fender work may be required; establish requirements on the actual vehicle. Assess approved tire width, diameter and full-travel suspension/fender clearance when choosing tires. |
| Ford Mustang | 1994–2004 | Bolt-pattern reference only. No exact-wheel square installation established. Verify axle, hub, brake, suspension and body fit independently, then feasible tire dimensions and full-travel clearance when choosing tires. |
| Ford Mustang / Shelby | 2015–2023 | Reference only. Broad retailer vehicle lists do not establish this +22 square setup's brake and body clearance. No blanket GT350, GT350R, GT500 or performance-brake approval. Verify actual hubs, lug-hole compatibility, load rating, brakes and fender coverage, then feasible tire dimensions and full-travel clearance when choosing tires. |
| Ford Mustang / Shelby | 2024–2026 | Reference only. No exact Saga SL 18×9.5 +22 square application established. Different TE37 offsets and variants are not proof. Independently assess axle, hub, brakes, body and suspension, then feasible tire dimensions and full-travel clearance when choosing tires. |
| Mazda MX-5 Miata NC | 2006–2015 | Bolt-pattern reference only. No exact 18×9.5 +22 Saga SL application established. Do not assume fender rolling makes it fit. Independently assess hubs, brakes, suspension and body envelope, then feasible tire diameter and full-travel clearance when choosing tires. NA, NB and ND use a different four-lug pattern. |
| Ford Mustang Fox-body | 1979–1993 | Standard four-lug hubs do not match. Five-lug conversions require build-specific hub, track-width, brake and hardware checks. No exact-wheel application established. Assess feasible tire dimensions and full-travel clearance when choosing tires after verifying wheel clearance. |
| AC Shelby Cobra / Replica | Build-specific | Reference only. Actual hubs, bolt patterns, brakes and body dimensions vary by build. No exact-wheel application established. Verify wheel fit and load rating independently, then feasible tire dimensions and full-travel clearance when choosing tires. |
Test-fit all four wheels before mounting tires. Independently verify wheel load rating, hub fit, any required hub-centric rings, correct lug-seat hardware, thread engagement and spoke/barrel clearance over the brakes. Check suspension travel and steering clearance. Tire choice cannot resolve wheel-to-brake interference. Do not rely on tire stretch, spacers or body modifications to make an otherwise unverified application fit.
Share
