FR SPORT
XXR 527 Wheel Gold 18x8.75 +35 5x100,5x114.3
XXR 527 Wheel Gold 18x8.75 +35 5x100,5x114.3
Couldn't load pickup availability
For nearly 40 years, XXR has designed and manufactured aluminum alloy wheels for car manufacturers and numerous aftermarket wheel companies. XXR Wheels was created to fill a void in the aftermarket wheel industry that nobody adressed; that void was a high quality wheel for the grassroots car enthusiast. XXR Wheels is now THE standard when it comes to quality, fitment, design, and affordability.
Vehicle Fitment Guide
XXR 527 Gold: 18x8.75, +35mm offset, dual-drilled 5x100 / 5x114.3, 73.1mm center bore. Matching public configuration: 52788107. Listed wheel load rating: 1,580 lb per wheel; verify the supplied wheel's rating against vehicle axle requirements.
Potential applications only; confirm exact trim, axle, tire size and brake/suspension/fender clearance when choosing tires. Matching bolt pattern alone does not establish fitment.
| Vehicle group | Applicable years / status | Fitment qualifications |
|---|---|---|
| Ford Mustang | 1994–2004: potential application | Same-model, same-size/offset listing in another finish specifies front or rear for 1994–1998; broader retailer application data includes 1999–2004. Treat later years as conditional. Confirm exact caliper/spoke clearance, hub fit and suspension/fender clearance. No blanket Cobra brake approval. |
| Ford Mustang / Shelby | 2005–2014: potential application | Same-model, same-size/offset listing in another finish specifies front or rear on 2010–2014 standard GT without Performance Pack and V6. Original supplier applications include 2005–2014, but do not independently establish Shelby, Boss 302 or big-brake clearance. Verify those trims separately. |
| Ford Mustang / Shelby | 2015–2023: conditional candidate | Same-model/configuration retailer application list includes this generation; axle placement and exact brake clearance are not confirmed. Test-fit before mounting tires. Performance Pack, GT350, GT500 and aftermarket brakes require separate verification. |
| Ford Mustang / Shelby | 2024–2026: conditional candidate | Same-model/configuration retailer application list includes these years; not confirmation for every trim or brake package. Verify both axles independently, including Dark Horse and performance brakes. |
| Mazda MX-5 Miata NC | 2006–2015: conditional candidate | Same-model/configuration retailer application list includes NC. This wide 18-inch configuration requires tire-specific fender, suspension and full-travel clearance checks; lowered cars may need alignment or fender work. Axle and exact spoke/caliper clearance are unconfirmed. |
| Volkswagen Jetta Mk4 | Reference only; not assigned | The Mk4 platform uses 5x100, but bolt pattern alone does not verify this 8.75-inch-wide wheel. Exact Jetta installation, fender clearance and suitable wheel-bolt seating/engagement remain unverified. Do not carry this application into later Jetta generations. |
| Ford Mustang Fox-body | 1979–1993: reference only; not assigned | Standard four-lug hubs are not a direct match. Any five-lug conversion requires a build-specific hub, offset and brake-clearance assessment. |
| Mazda Miata NA / NB / ND | Reference only; not assigned | Standard 4x100 hubs do not match either drilling. NC application evidence must not be transferred to these generations. |
| AC Shelby Cobra / Replica | Reference only; not assigned | Hub pattern, suspension, brakes and body clearance vary by chassis or kit. A 5x114.3 hub alone is insufficient to establish compatibility. |
Confirm wheel-to-caliper clearance, barrel clearance, hub centering, compatible lug hardware and adequate thread engagement before installation. Use only the drilling that matches the vehicle. Hub rings, if required, must match the actual wheel and vehicle hub. Tire selection cannot correct wheel/brake interference or an incompatible hub, lug seat or load rating. No spacer requirement or spacer-based clearance solution is established by this guide.
Share
